Original XHORSE MVCI 3 IN 1 is a high perfomance factory diagnose
tool for Toyota,H-onda and Volvo.
Toyota newest version:V7.10.030
Original XHORSE MVCI 3 IN 1
Toyota newest version: V7.31.003
What you have to pay attention when using this tool?
1. Your computer must be windows XP system.
2. Please choose area EUROPEAN when you installing the software.
Then it will not ask you for activation code.
MVCI is a high performance factory diagnostics for TOYOTA TIS. MVCI
is compatible with Toyota, Lexus, and Scion vehicles over the J1962
1.Worked car model
H-onda, Toyota, Lexus and Volvo.
Fully compatible with Toyota TIS Techstream
Supports Diagnostics, and Active tests.
Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with
Fully compatible with SAE J2534
Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm
Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm
RGB status LEDs
Operating Temperature:-20 to 70
Storage Temperature: -40 to 85
Diagnostic Interface:16 PIN
USB Interface:USB 2.0
Power:DC 5 V - 36 V
Dimensions:23CM x 16CMx 9CM
1.User Manual: Instructions on tool operations
2.Driver CD: Includes user manual, drivers, and etc.
3.OBD II cable: Communicates between tool and vehicle
4.USB cable: Communicates between tool and PC/Laptop
5.Carry case: A nylon case to store the tool when not in use.
How to know if your MVCI is original or not, please check the
following picture, our MVCI is original one: